Johnny G3LIV © 2014
This USB ISOTERM TRAVELLER Interface is in addition to
the very popular RS232 Traveller version.
Its compact size is well suited for portable/holiday use.
With the added direct USB connection for later computers.
BLACK screened panels distinguish it from the RS232 model
It allows the usual Data modes.
PSK...RTTY...WSJT...SSTV...WSPR and many more
One RED TX and One GREEN RX front panel mounted Leds show PTT switching activity.
Computer Audio in/out connections is made thru the supplied 3.5mm cable.
The interchangeable cable allows the interface to be used with any transceiver.
The cable is terminated in a 6 Pin Mini Din plug to fit the interface and whatever Plug is required to suit the rig it is being purchased for.
Only needing a change of cable to be plugged in, to suit a new transceivers connection.
There are both Rx waterfall and Tx attenuator controls front panel mounted for operator convenience.
All paths between the COMPUTER and TRANSCEIVER are isolated with
COMs TRANSFORMERS in BOTH AUDIO LINES.
And a DIL RELAY in the PTT LINE
The Dil Relay for PTT control allows ALL rigs to have the PTT controlled from the software.
So no matter what rigs you intend to use, this unit will take care of the PTT switching.
On the computer side 2 – 3.5mm stereo jack plugs take care of the computer to interface audio connections.
And a double ended USB connector for PTT.
Extruded aluminium box 80mm Deep – 55 mm wide – 24mm High.
These two jacks are plugged into the Soundboard's LINE IN/ LINE OUT jack sockets.
Or if a laptop is to be used, its Mike and Headphone Jack Sockets.
The RTS line for PTT switching via USB connections.
Both RX and TX attenuators are accessible .
This along with the PC Soundboard Audio controls helps prevent overdriving of the Rig.
And less travelling back and forwards to the Soundboard Sliders.
ALL ISOTERM interfaces are also suitable for SSTV-
KH6TY DIGIPAN software for PSK MODEs is supplied.
DIGIPAN has not been updated for some time, so please use AIRLINK EXPRESS.
I am not allowed by the writer to add this to my CD.
It is readily available if Googled.
CWGET and CWTYPE and MMTTY are also supplied.
Information is also given on other web sites for additional DATA software
Full settings up instructions are of course supplied.
Extra sheets of instructions are enclosed to help further.
Price of the USB DATA TRAVELLER INTERFACE FULLY wired is £64.00 .
This includes 1 Transceiver connecting cable standard length circa 1 Mtr.
And ALL computer leads as required.
Within UK First Class Royal Mail £5.00= Total Price £69.00
Within Europe First Class Royal Mail £6.50 = Total Price £70.50
World Wide First Class Royal mail, Signed for £10.00 = Total Price £74.00
Additional transceiver cables can be supplied at £12 if ordered with the interface.
Or £12.00 plus p/p £3.00. if ordered at a later date..
Most transceivers can be accommodated.
FULLY WIRED means ALL plugs to suit both Computer and 1 Transceiver .
I am prepared to taylor the cables to suit individual customers should this be an advantage